X-Range Inverter Panels

X-Range - Inverter Drives Mounted in Cabinets

Standard off-the-shelf variable speed inverters are usually only rated at IP20 and need to be built into an enclosure before they can be used in most environments. 

We have developed a range of enclosures with inverters pre-installed in them along with other necessities such as cooling fans. We also offer a selection of optional extras such as stainless steel enclosures, Emergency Stop Relays, Remote Keypads, and Remote Control options.

Most variable speed drive failures can be attributed to poor installation practices. While most manufacturers guide users through the keypad operation to ensure nothing is forgotten in the setup, outside factors are the most common causes of failures.

These include:-

  • Unsuitable location/environment
  • Incorrect cable types and/or wiring
  • Interference caused by cable routing near other electrical equipment 
  • Temperature control
  • Improper grounding/earthing

Goodwin Electronics has over 40 years of experience working in the motion control industry so knows how to keep your inverter drive healthy for longer. We ensure that all our panels are made with the correct electrical and environmental protection, adequate cooling and ventilation and easy access controls.

Below is a selection of completed panels available for delivery right away. Alternatively you can use contact us directly for help designing a custom panel that is right for you. 

 

X00005 – X-Range Pre-Built Inverter Panel
This VFD inverter ready fitted into steel cabinet ready for installation.
It comes with:

  • Inverter – Yaskawa V1000 1ph 200V 18A
  • Includes – Isolator, Fan, MCB
  • Controls – V/f, 2-wire
  • Pushbuttons – Start/Stop
  • Selector Switch – Fwd/Rev
  • Other – Potentiometer (0-100%), Emergancy Stop, Alarm Reset
  • Lamps:
    • Power On
    • Drive Healthy

Option available to fit smaller capacity inverters of same voltage or option for different types in some cases, ask for further information

Call to Enquire
X00003 – X-Range Pre-Built Inverter Panel – SOLD
This VFD inverter ready fitted into steel cabinet ready for installation.
It comes with:

  • Inverter – Yaskawa V1000 1ph 200V 3A 0.75kW
  • Cabinet Size – 400 (w) x 400 (h) x 200 (d)
  • Includes – Isolator, Fan, MCB
  • Controls – V/f, 2-wire
  • Selector Switch – On/Off, Fwd/Rev
  • Other – Emergency Stop
  • Lamps:
    • Power On
    • Drive Healthy

Option available to fit smaller capacity inverters of same voltage or option for different types in some cases, ask for further information

£750.00 ex.VAT

Call to Enquire
X00004 – X-Range Pre-Built Inverter Panel – SOLD

For sale VFD inverter ready fitted in steel cabinet ready for installation comes with:

  • Inverter – Yaskawa V1000 3ph 400V 7A 3kW
  • Cabinet Size – 400 (w) x 500 (h) x 200 (d)
  • Includes – Isolator, Fan, MCB1
  • Controls – V/f, 3-wire
  • Pushbuttons – Start/Stop
  • Selector Switch – Fwd/Rev
  • Other – Potentiometer (0-100%)
  • Lamps:
    • Power On
    • Drive Healthy

Option available to fit smaller capacity inverters of same voltage or option for different types in some cases, ask for further information

£940.00 ex.VAT

Call to Enquire
X20000 – X-Range Pre-Built Inverter Panel – SOLD

For sale VFD inverter ready fitted in steel cabinet ready for installation comes with:

  • Inverter – Yaskawa J1000 1ph 200V 6A 1.1kW
  • Cabinet Size – 300 (w) x 300 (h) x 200 (d)
  • Includes – No Isolator or Fan, 13A Plug
  • Controls – V/f, 3-wire
  • Pushbuttons – Start/Stop
  • Potentiometer – 40-100%
  • Lamp:
    • Stopped/Running Bi-Colour

Option available to fit smaller capacity inverters of same voltage or option for different types in some cases, ask for further information.

Specifically designed for light commercial or domestic use, depending on supply available.
Customer to specify ventilation option required (side or top) before dispatch

£415.00 ex.VAT

Call to Enquire
X50000 – X-Range Pre-Built Inverter Panel + Control Pendent – SOLD

For sale VFD inverter ready fitted in steel cabinet ready for installation comes with:

  • Inverter – Nidec/CT C200 034 00094A 3ph 400V 4KW
  • Cabinet Size – 400 (w) x 600 (h) x 300 (d)
  • Includes – Isolator, Fan (door mounted), MCB
  • Controls – V/F, 3-wire
  • Lamp:
    • Power On (White),
  • Pendant:
    • Pushbutton Start & Stop
    • Lamp Drive Running (Green)

Option available to fit smaller capacity inverters of same voltage or option for different types in some cases, ask for further information

£905.00 ex.VAT

Call to Enquire
PPMA1 – X-Range Pre-Built Inverter Panel

For sale VFD inverter ready fitted in steel cabinet ready for installation comes with:

  • Inverter – Yaskawa GA700 3ph 400V 12A 5.5kW
  • Cabinet Size – 400 (w) x 600 (h) x 300 (d)
  • Includes – Isolator, Fan, MCB
  • Controls – V/f 2-wire
  • Other – Digital operator mounted on door
  • Lamp:
    • Power On (White) on side

Option available to fit smaller capacity inverters of same voltage or option for different types in some cases, ask for further information

Rental Options

Call to Enquire
PPMA2 – X-Range Pre-Built Inverter Panel

For sale VFD inverter ready fitted in steel cabinet ready for installation comes with:

  • Inverter – Yaskawa V1000 1ph 200V 18A
  • Cabinet Size – 400 (w) x 600 (h) x 300 (d)
  • Includes – Isolator, Fan (door), MCB
  • Controls – v/f, 3-wire
  • Pushbutton – Start/Stop
  • Selector Switch – Fwd/Rev
  • Other – Potentiometer (0-100%)
  • Lamps:
    • Power On (White)
    • Drive Healthy (Green)

Rental Options

Call to Enquire